Manufactur standard Mighty Magnetic Hook - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We will constantly satisfy our respected customers with our good excellent, superior value and superior assistance due to we're additional experienced and far more hard-working and do it in cost-effective way for 6 Inch Round Magnets, 1T type box magnet, Magnetic Holder, We have been also the appointed OEM manufacturing unit for several worlds' famous merchandise brands. Welcome to contact us for more negotiation and cooperation.
Manufactur standard Mighty Magnetic Hook - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko Detail:

Pipeline Magnetic Marker is composed of super powerful permanent magnets, which could forms a magnetic field circle around magnets, metal body and pipe tube wall. It’s designed to detect magnetic flue leakage for  pipeline inspection, which is one of the most popular methods of underground pipeline inspection, widely used in petroleum, nature gas and chemical raw materials. It is a nondestructive testing technique which uses magnetic marker to detect the magnetic leakage field of defects on both the internal and external surfaces of pipelines.        

                                                                              ANSYS Mold of Magnetic Field

Marker_Magnet_PipelineANSYS_MOLD_PIPELINE_MAGNET_MARKER

 

 

 

 

 

 

 

Precautions for Magnetic Marker on-site installation:

(1) It must be an obvious markers directly above the location where the magnetic markers are installed.
(2) It needs to install on the outer surface of the pipeline closely, but no damage to the anti-corrosion layer and pipe wall grinding.  Normally it can be effectively detected under 50mm thickness of  pipe anti-corrosion layer.
(3) It is recommended to stick it on the pipeline at 12 o’clock. If it is stuck on other hours, it should be recorded.
(4) No magnetic mark can be installed above the casing points.
(5) It is not recommended to install a magnetic mark above the elbow
(6) The distance of Magnetic mark installation and weld points should be more than 0.2m.
(7) All the operation should be under normal temperature conditions, high temperature heating will demagnetize the magnetic field
(8) Careful to install, no hammer, no bump

MAGNETIC_MARKER_MAGNETIC_FLUX_LEAKAGE_INSPECTION

 


Product detail pictures:

Manufactur standard Mighty Magnetic Hook - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko detail pictures


Related Product Guide:

We are also focusing on improving the stuff management and QC system so that we could keep great advantage in the fiercely-competitive business for Manufactur standard Mighty Magnetic Hook - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko, The product will supply to all over the world, such as: Lahore, Iceland, Germany, Our company follows laws and international practice. We promise to be responsible for friends, customers and all partners. We would like to establish a long-term relationship and friendship with every customer from all over the world on the basis of mutual benefits. We warmly welcome all old and new customers to visit our company to negotiate business.
  • The enterprise has a strong capital and competitive power, product is sufficient, reliable, so we have no worries on cooperating with them.
    5 Stars By Josephine from Philippines - 2018.12.28 15:18
    Although we are a small company, we are also respected. Reliable quality, sincere service and good credit, we are honored to be able to work with you!
    5 Stars By Iris from Rio de Janeiro - 2018.09.21 11:01

    Related Products