Manufacturer for Round Based Magnet - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

Being supported by an highly developed and specialist IT team, we could give technical support on pre-sales & after-sales service for Rubber Recess Former, Stainless Steel Shuttering Magnet, Rectangular Magnets, Our company insists on innovation to promote the sustainable development of enterprise, and make us become the domestic high-quality suppliers.
Manufacturer for Round Based Magnet - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko Detail:

Pipeline Magnetic Marker is composed of super powerful permanent magnets, which could forms a magnetic field circle around magnets, metal body and pipe tube wall. It’s designed to detect magnetic flue leakage for  pipeline inspection, which is one of the most popular methods of underground pipeline inspection, widely used in petroleum, nature gas and chemical raw materials. It is a nondestructive testing technique which uses magnetic marker to detect the magnetic leakage field of defects on both the internal and external surfaces of pipelines.        

                                                                              ANSYS Mold of Magnetic Field

Marker_Magnet_PipelineANSYS_MOLD_PIPELINE_MAGNET_MARKER

 

 

 

 

 

 

 

Precautions for Magnetic Marker on-site installation:

(1) It must be an obvious markers directly above the location where the magnetic markers are installed.
(2) It needs to install on the outer surface of the pipeline closely, but no damage to the anti-corrosion layer and pipe wall grinding.  Normally it can be effectively detected under 50mm thickness of  pipe anti-corrosion layer.
(3) It is recommended to stick it on the pipeline at 12 o’clock. If it is stuck on other hours, it should be recorded.
(4) No magnetic mark can be installed above the casing points.
(5) It is not recommended to install a magnetic mark above the elbow
(6) The distance of Magnetic mark installation and weld points should be more than 0.2m.
(7) All the operation should be under normal temperature conditions, high temperature heating will demagnetize the magnetic field
(8) Careful to install, no hammer, no bump

MAGNETIC_MARKER_MAGNETIC_FLUX_LEAKAGE_INSPECTION

 


Product detail pictures:

Manufacturer for Round Based Magnet - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko detail pictures


Related Product Guide:

To create far more benefit for customers is our company philosophy; customer growing is our working chase for Manufacturer for Round Based Magnet - Pipeline Permanent Magnetic Marker for Magnetic Flux Leakage Detection – Meiko, The product will supply to all over the world, such as: Ukraine, Canada, Portugal, With the highest standards of product quality and service, our products have been exported to more than 25 countries like the USA, CANADA, GERMANY, FRANCE, UAE, Malaysia and so on.We are very pleased to serve customers from all over the world!
  • The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
    5 Stars By Andrea from Jamaica - 2017.06.29 18:55
    This is a very professional wholesaler, we always come to their company for procurement, good quality and cheap.
    5 Stars By Klemen Hrovat from Tanzania - 2017.12.31 14:53

    Related Products